In The News

UniTorq Actuators & Controls is pleased to announce the new UT-ZM Declutchable Gear Override. Available in torque outputs ranging from 1,770 to 61,995 in lbs., the UT-ZM provides a safe, cost-effective solution for manual control of the valve whenever air supply or power to a pneumatic actuator is lost.

The UT-ZM is available with options that make it one of the safest overrides to operate. The Isolation Safety Option provides internal porting that automatically blocks and releases air from the actuator, making operation of the gear safer and easier. The internal porting also eliminates the need to assemble extra tubing, tees, valves and fittings, making installation easier and safer.

All overrides feature a corrosion resistant housing that conforms to IP67 protection standards, sturdy die cast aluminum hand wheels, stainless steel declutch bars, and spring-loaded pins that help to lock the unit into position. For additional safety, a Padlock kit can be added to prevent unintended operation.


Read More

For more information contact UniTorq sales at 770-446-7074

UniTorq Announces Patent Pending Status On Its New Line of Rack and Pinion Actuators

UniTorq is proud to announce that the company submitted a provisional patent application on November 25, 2015 for proprietary technical advances on its new line of pneumatic rack and pinion actuators. Most notably, UniTorq introduced two design advancements to address points of failure and stress common in other actuators:

1. An upgraded thrust bearing that limits friction between the actuator body and pinion and
2. A minimum of two pinion teeth engagement with the piston rack throughout the actuator stroke, unique in the industry, to provide consistent torque output and accuracy. These design advancements improve actuator durability and efficiency.

“We are excited to announce that UniTorq has been granted patent pending status on our cornerstone line of rack and pinion actuators and will continue to take steps to protect the intellectual property that enables our products to lead the industry in innovation and reliability.“ said Jack Curtin, President of UniTorq. “We're confident our customers will continue to rely upon UniTorq’s commitment to providing the best, and most cutting edge, products on the market.”

UniTorq's U.S. Provisional Application No. 62/255,762 is currently on file with the United States Patent and Trademark Office.

---

M-Series Sizing Calculator Makes Selection Easy!

UniTorq makes it easy to select the correct actuator model with the M-Series pneumatic actuator. The Actuator Sizing Calculator lets you input torque, safety factor, air supply values, and spring return or double acting preference. The tool gives you the proper size for your application in a printable format.

Click Here to Access the Actuator Sizing Tool

---

UT-ZM Declutchable Gear Override Offers Safer, Easier Manual Control

UniTorq Actuators & Controls is pleased to announce the introduction of the New UT-ZM Declutchable Gear Override. Available in torque outputs ranging from 1,770 to 61,995 in lbs., the UT-ZM provides a safe, cost-effective solution for manual control of the valve whenever air supply or power to a pneumatic actuator is lost.

Read More

---

New Speed Controls Provide Slow Open/Slow Close Capability

UniTorq adds speed control to our accessory line, enabling accurate and precise control of the open/close speed of the valve. It can be mounted directly on the actuator or be used with a Namur solenoid valve and/or positioner. Speed controls are available in spring or double acting models.

Read More

---

UniTorq is ISO 9001:2008 Certified

UniTorq renewed their ISO 9001:2008 certification. Additionally, UniTorq holds SIL3 Certification for it's line of pneumatic rack and pinion actuators to IEC 61508 and IEC 61511.

---